[Apr-2024] NSE6_FAZ-7.2 PDF Dumps Extremely Quick Way Of Preparation
Download NSE6_FAZ-7.2 Dumps (2024) - Free PDF Exam Demo
NEW QUESTION # 19
Which two statements about FortiAnalyzer operating modes are true? (Choose two.)
- A. For the collector, you should allocate most of the disk space to analytics logs.
- B. When in analyzer mode. FortiAnalyzer supports event management and reporting features.
- C. Analyzer mode is the default operating mode.
- D. When in collector mode. FortiAnalyzer offloads the log receiving task to the analyzer.
Answer: B,C
Explanation:
The default operating mode for FortiAnalyzer is analyzer mode. In this mode, FortiAnalyzer provides full functionality for event management and reporting features. This mode is intended for environments where comprehensive analysis and reporting are required. It allows FortiAnalyzer to collect, analyze, and store logs, as well as generate reports and manage events.References:FortiAnalyzer 7.4.1 Administration Guide,
"Operating modes" section.
NEW QUESTION # 20
Refer to the exhibit.
Based on the partial outputs displayed in the exhibit, which devices are ready to be configured as peers in an HA cluster?
- A. FortiAnalyzer1 and FortiAnalyzer2
- B. These devices cannot participate in the same cluster.
- C. FortiAnalyzer1 and FortiAnalyzer3
- D. FortiAnalyzer2 and FortiAnalyzer3
Answer: B
Explanation:
Based on the provided exhibit, which shows partial outputs of the system status and global settings for FortiAnalyzer devices, the devices cannot be configured as peers in an HA (High Availability) cluster. This is indicated by the HA Mode status being set to 'Stand Alone' for the displayed FortiAnalyzer device. For devices to be part of an HA cluster, they would need to havecompatible HA configurations, and usually, they should not be in 'Stand Alone' mode. Additionally, the exhibit only shows information for one FortiAnalyzer, so it cannot be determined if there is another device ready to form an HA cluster with it.
NEW QUESTION # 21
Which items must you configure on FortiAnalyzer to send its reports to an external server?
- A. Output profile
- B. Mail server
- C. Report schedule
- D. Fabric connector
Answer: A
Explanation:
To send reports from FortiAnalyzer to an external server, you must configure the output profile. This involves specifying the method (FTP, SFTP, or SCP), server IP, username, password, and the directory where the report will be saved. Additionally, you have the option to delete the report after it has been uploaded to the server.References:FortiAnalyzer 7.2 Administrator Guide, "Enable uploading of generated reports to a server" section.
NEW QUESTION # 22
What areanalytics logs on FortiAnalyzer?
- A. Logs that are compressed and saved to a log file
- B. Logs that roll over when the log file reaches a specific size
- C. Logs thatare indexed and stored in the SQL
- D. Logs classified as type Traffic, or type Security
Answer: C
Explanation:
On FortiAnalyzer, analytics logs refer to the logs that have been processed, indexed, and then stored in the SQL database. This process allows for efficient data retrieval and analytics. Unlike basic log storage, which might involve simple compression and storage in a file system, analytics logs in FortiAnalyzer undergo an indexing process. This enables advanced features such as quick search, report generation, and detailed analysis, making it easier for administrators to gain insights into network activities and security incidents.References:FortiAnalyzer 7.2 Administrator Guide - "Log Management" and "Data Analytics" sections.
NEW QUESTION # 23
Which two parameters impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)
- A. RAID level
- B. Disk size
- C. Total quota
- D. License type
Answer: A,B
Explanation:
The amount of reserved disk space required by FortiAnalyzer is influenced by the disk size and the RAID level. The system reserves a portion of the disk space for system use and unexpected quota overflow, with the rest available for device allocation. The RAID level determines the disk size and the reserved disk quota level, with different RAID configurations leading to variations in the reserved space.References:FortiAnalyzer 7.2 Administrator Guide, "Disk Space Allocation" and "RAID Level Impact" sections.
NEW QUESTION # 24
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails.
What can be the problem?
- A. fortinet is assigned Restricted_User administrative profile.
- B. A trusted host is configured.
- C. ADOM mode is configured with Advanced mode.
- D. fortinet is assigned the Standard_User administrative profile.
Answer: D
Explanation:
If the administrator "fortinet" can view logs and perform device management tasks but cannot create a mail server for alert emails, it is likely due to the administrative profile assigned to them. The Standard_User administrative profile may restrict certain administrative functions, such as creating mail servers. To perform all administrative tasks, including creating mail servers, a higher privilege profile, such as Super_Admin, might be required.References:FortiAnalyzer 7.2 Administrator Guide, "Mail Server" section.
NEW QUESTION # 25
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. Run execute format disk to format and restart the FortiAnalyzer device.
- B. There is no need to do anything because the disk will self-recover.
- C. Shul down FortiAnalyzer and replace the disk.
- D. Perform a hot swap of the disk.
Answer: D
Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.References:FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.
NEW QUESTION # 26
An administrator has configured the following settings:
What is the purpose of executing these commands?
- A. To create the secure channel used by the OFTP process.
- B. To encrypt log transfer between FortiAnalyzer and other devices.
- C. To record the hash value and authentication code of log files.
- D. To verify the integrity of the log files received.
Answer: D
Explanation:
The purpose of executing the provided CLI commands, which include setting thelog-checksumtomd5-auth, is to ensure the integrity of the log files. This setting is used to record the MD5 hash value of log files, which is a widely used cryptographic hash function that produces a 128-bit (16-byte) hash value. By using MD5 authentication, FortiAnalyzer ensures that the log files have not been altered or tampered with during transit, thereby verifying their integrity upon receipt.This is not related to encrypting log transfers, scheduling reports, or creating secure channels for OFTP (Over-the-FortiGate Protocol) processes.
NEW QUESTION # 27
Which two statements are true regarding FortiAnalyzer system backups? (Choose two.)
- A. Existing reports can be included in the backup files.
- B. The system reserves at least 5% to 20% disk space for backup files.
- C. Scheduled system backups can be configured only from the CLI.
- D. Backup files can be uploaded to SCP and SFTP servers.
Answer: A,D
Explanation:
FortiAnalyzer allows for the inclusion of existing reports in the backup files, providing a comprehensive backup of configurations and data. Additionally, the backup files can be configured to be uploaded to SCP and SFTP servers, ensuring secure transfer and offsite storage of backup data. This can be configured both in the GUI and the CLI, providing flexibility in how backups are scheduled and managed.References:FortiAnalyzer
7.4.1 Administration Guide, "Scheduling automatic backups" section.
NEW QUESTION # 28
You finished registering a FortiGate device. After traffic starts to flow through FortiGate. you notice that only some of the logs expected are being received on FortiAnalyzer.
What could be the reason for the logs not arriving on FortiAnalyzer?
- A. FortiGate does not have logging configured correctly.
- B. FortiGate was added to the wrong ADOM type.
- C. This FortiGate model is not fully supported.
- D. This FortiGate is part of an HA cluster but it is the secondary device.
Answer: A
Explanation:
When only some of the expected logs from a FortiGate device are being received on FortiAnalyzer, it often indicates a configuration issue on the FortiGate side. Proper logging configuration on FortiGate involves specifying what types of logs to generate (e.g., traffic, event, security logs) and ensuring that these logs are directed to the FortiAnalyzer unit for storage and analysis. If the logging settings on FortiGate are not correctly configured, it could result in incomplete log data being sent to FortiAnalyzer. This might include missing logs for certain types of traffic or events that are not enabled for logging on the FortiGate device.
Ensuring comprehensive logging is enabled and correctly directed to FortiAnalyzer is crucial for full visibility into network activities and for the effective analysis and reporting of security incidents and network performance.
NEW QUESTION # 29
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
- A.
- B.
- C.
Answer: C
Explanation:
The exhibit shows a packet capture with a syslog message containing a log event from a FortiGate device. This log event includes several details such as the date, time, and event message. The corresponding image that matches this packet capture would be the one which shows that the FortiGate device has logs being received in real-time, as indicated by the highlighted section in the packet capture where it mentions "real-time".
Therefore, Option A is the correct answer because it shows logs with "Real Time" status for the FortiGate-VM64 device, indicating that this FortiAnalyzer is currently receiving real-time logs from the device, matching the activity in the packet capture.References:Based on the provided exhibits and the real-time logging information, correlated with the knowledge from the FortiAnalyzer 7.2 Administrator documentation regarding log reception and device management.
NEW QUESTION # 30
What is true about a FortiAnalyzer Fabric?
- A. The members send their logs to the supervisor.
- B. The supervisor and members cannot be in different time zones
- C. Members events can be raised from the supervisor.
- D. Supervisors support HA.
Answer: A
Explanation:
In a FortiAnalyzer Fabric, the FortiAnalyzer can recognize a Security Fabric group of devices, and it supports the Security Fabric by storing and analyzing logs from these units as if they were from a single device. The members of the Security Fabric group send their logs to the FortiAnalyzer, which acts as a supervisor for log storage and analysis, providing a centralized point of visibility and control over the logs.References:FortiAnalyzer 7.4.1 Administration Guide, "Security Fabric" section.
NEW QUESTION # 31
Which statement is true when you areupgrading the firmware on an HA cluster made up of throe FortiAnalyzer devices?
- A. You can perform thefirmware upgrade using only a console connection.
- B. All FortiAnalyzer devices will be upgraded at the same time.
- C. Enabling uninterruptible-upgrade prevents normal operations from being interrupted during the upgrade.
- D. First, upgrade the secondary devices, and then upgrade the primary device.
Answer: D
Explanation:
In an HA cluster, the firmware upgrade process involves upgrading the secondary devices first. This approach ensures that the primary device can continue to handle traffic and maintain the operational stability of the network while the secondary devices are being upgraded. Once the secondary devices have successfully upgraded their firmware and are operational, the primary device can then be upgraded. This method minimizes downtime and maintains network integrity during the upgrade process.
When upgrading firmware in a High Availability (HA) cluster of FortiAnalyzer units, the recommended practice is to first upgrade the secondary devices before upgrading the primary device. This approach ensures that the primary device, which coordinates the cluster's operations, remains functional for as long as possible, minimizing the impact on log collection and analysis. Once the secondary devices are successfully upgraded and operational, the primary device can be upgraded, ensuring a smooth transition and maintaining continuous operation of the cluster.References:FortiAnalyzer 7.2 Administrator Guide - "System Administration" and
"High Availability" sections.
NEW QUESTION # 32
......
Enhance your career with NSE6_FAZ-7.2 PDF Dumps - True Fortinet Exam Questions: https://www.dumpexam.com/NSE6_FAZ-7.2-valid-torrent.html
New Download free NSE6_FAZ-7.2 PDF for Fortinet Practice Tests: https://drive.google.com/open?id=1hMO6ugV6FUvC90e0RD0txdsKSzosOmnI
