[Aug-2026 Newly Released] QSSA2022 Exam Questions For You To Pass
Qlik QSSA2022 Exam: Basic Questions With Answers
Qlik QSSA2022 (Qlik Sense System Administrator Certification Exam - 2022) is a certification exam designed for professionals who are responsible for the administration and management of Qlik Sense environments. QSSA2022 exam tests the candidate's knowledge and skills in areas such as installation, configuration, security, performance optimization, and troubleshooting of Qlik Sense environments.
NEW QUESTION # 84
Refer to the exhibit.
A system administrator creates the security rule shown. No other custom security rules exist. What effect will the security rule have when applied to a user?
- A. If the user is NOT in AAAConsumer group, the user cannot create sheets
- B. If the user is NOT in AAAConsumer group, the user can create app objects in non-published apps
- C. If the user is NOT in AAAConsumer group, the user can create app objects in published apps
- D. If the user is in AAAConsumer group, the user can create app objects in published apps
Answer: D
NEW QUESTION # 85
In Qlik Sense, which component is responsible for synchronizing user and group information with Active Directory?
Response:
- A. Qlik Sense Engine Service (QES)
- B. Qlik Sense Repository Service (QRS)
- C. Qlik Sense Scheduler Service (QSS)
- D. Qlik Sense Proxy Service (QPS)
Answer: B
NEW QUESTION # 86
A system administrator is setting up a multi-node Qlik Sense deployment. They have already installed Qlik Sense on the central node and must now add a rim node to handle additional application reload tasks.
What steps should the administrator take to configure the rim node?
A) Install Qlik Sense on the rim node.
B) Configure the shared persistence path.
C) Set up load balancing rules.
D) Register the rim node in the Qlik Management Console (QMC).
- A. A -> C -> B -> D
- B. A -> B -> C -> D
- C. A -> D -> B -> C
- D. D -> A -> B -> C
Answer: C
NEW QUESTION # 87
When performing a Qlik Sense installation, which configurations must be considered for network security?
(Select two)
- A. Configure SSL certificates for secure communication.
- B. Enable port forwarding for all services.
- C. Disable network load balancing.
- D. Open required ports for Qlik Sense services.
Answer: A,D
NEW QUESTION # 88
A business analyst creates and tests an app on Qlik Sense Desktop. The analyst sends the QVF file to a system administrator and requests the file to be imported into Qlik Sense Enterprise.
The system administrator imports the file, but the data reload fails. The administrator imports and opens the app in the Qlik Sense Desktop, then realizes that Section Access has been implemented.
What is causing this issue with the reload on the server?
- A. The Content Admin role was NOT assigned to the business analyst
- B. The Qlik Sense service account is missing in the Section Access table
- C. The system administrator did NOT import the data connection and apply Section Access
- D. The sa_scheduler entry is missing in the Section Access table
Answer: D
NEW QUESTION # 89
A Qlik Sense site consists of a single server that runs at approximately 50% of capacity. The Qlik Sense service has recently been upgraded in the organization's criticality matrix. The following new requirements must be met:
- The site must be designed for high availability
- Routine maintenance on a server should NOT impact performance
- A server can have OS patches installed without affecting performance
- A component of a server can be replaced/upgraded without affecting performance Which two steps should the administrator take to meet these requirements?
(Select two)
- A. Set up a Windows Cluster to distribute user traffic
- B. Configure a network load balancer to distribute user traffic
- C. Configure a reverse proxy to distribute user traffic
- D. Add a rim node to the existing Qlik Sense site
- E. Create a second Qlik Sense site with two nodes
Answer: B,D
NEW QUESTION # 90
An organization needs to deploy Qlik Sense Enterprise on Windows to meet several security requirements:
- Users in the 'Developers' group should be able to create apps;
- Users with ContentAdmin and RootAdmin roles should be able to create apps;
- No other users should be able to create apps.
Which two actions should the system administrator take to meet these requirements?
(Select two)
- A. Add the ContentAdmin role to the 'Developers' group
- B. Create a security rule for apps: Action: Create, Condition: ((user.roles="RootAdmin" or user.roles="ContentAdmin" or user.group="Developers"))
- C. Create a security rule for streams, Action: Update, Condition: ((user.roles="RootAdmin" or user.roles="ContentAdmin" or user.group="Developers"))
- D. Disable the CreateApp default security rule
Answer: B,D
NEW QUESTION # 91
IT conducts an audit at Qlik Sense installation. The environment has been configured within the defaults options and all RIM nodes have all possible services running.
The auditing process consists of making sure that all traffic is encrypted with 256-bit keys and that passwords follow basic security standards with the use of letters, numbers, and minimum number of characters.
What would be missing to deploy to make the Qlik Sense environment within the requirements?
- A. A firewall web application
- B. A third-party certificate and VPN
- C. A reverse proxy
- D. A third-party trust certificate installed
Answer: C
NEW QUESTION # 92
A system administrator notices that several Qlik Sense apps are experiencing performance issues. What is the best tool to use for identifying resource bottlenecks in the system?
- A. Log Monitor
- B. License Monitor
- C. Operations Monitor
- D. Governance Dashboard
Answer: C
NEW QUESTION # 93
Which tools can be used to monitor Qlik Sense reload task failures?
(Select two)
- A. License Monitor
- B. Task Manager in Windows
- C. Operations Monitor
- D. Reloads Monitor
Answer: C,D
NEW QUESTION # 94
Poor performance has been reported in a Qlik Sense environment. End users are losing connectivity to the system. When end users are eventually able to log in after many attempts, navigation and app consumption is slow. Long response times each click are also reported.
A system administrator confirms the following:
- The network is stable and has good throughput
- The QliK Sense server is running virtual on dedicated resources with high-end CPUs
- The number of users in the system has NOT incrased
- The data model has NOT changed
- The number and size of apps have increased over time
Which combination of tools should be used to diagnose this issue?
- A. Windows Task Manager. Windows Event Viewer. Windows Explorer, and Process Monitor from Sysmternals
- B. Governance Dashboard, ipconfiq. tracert. Wireshark, and the System Monitor app
- C. Process Explorer from Sysinternals. Windows Task Manager, Windows Event Viewer, and the Operations Monitor app
- D. Wireshark, Disk Usage from Sysmternals, Windows Task Manager, and the Operations Monitor app
Answer: D
NEW QUESTION # 95
A company had only one server and later made an additional Qlik server available and configured it as a scheduler node. There is a recharge task that occurs every 30 minutes, every day.
When the task is performed, users suffer from poor performance in browsing applications. Then, when analyzing the settings in QMC, the system administrator identifies that the consumption node runs the services: Engine, Scheduler, Repository, and Proxy.
The scheduler node runs: Engine, Scheduler, and Repository.What is the most efficient method for improving performance?
- A. Set tasks to run only during non-business hours, such as 00:00AM
- B. Change the Scheduler Node to "Slave" (or Secondary) and the consumption node to "Master" (or Primary)
- C. Remove the Scheduler service from the consumption node
- D. Increase the number of tasks on the scheduler node (Scheduler Node)
Answer: B
NEW QUESTION # 96
A single-node Qlik Sense environment has all services up and running. Users report apps and sheets are slow to open. A system administrator works remotely and does NOT have access to the shared file system for the environment. The system administrator's computer can make requests to the Qlik Sense Repository Service.
Due to the system performance issues, a system administrator can NOT run any new reloads. The system administrator receives a warning email about high RAM usage on the server.
Which step should the system administrator take to troubleshoot this issue?
- A. Request the "https://<server.domain.com>/qmc/audit" API
- B. Request the "http://<server.domain.com>/engine/performancecheck/" API
- C. Access the server remotely and inspect the logs in %ProgramData%\Qlik\Sense\Log\Engine
- D. Request the "https://<server.domain.com>/engine/healthcheck/" API
Answer: C
NEW QUESTION # 97
A Qlik Sense administrator needs to troubleshoot a task that consistently fails to reload dat a. Using the Qlik Management Console (QMC), what steps should the administrator take to resolve the issue?
(Choose the correct sequence)
A) Open QMC and navigate to the "Tasks" section.
B) Select the failed task and review the task execution logs.
C) Identify any errors in the task log and correct the data source connection.
D) Re-run the task after making the necessary corrections.
- A. A -> B -> C -> D
- B. B -> D -> C -> A
- C. C -> A -> D -> B
- D. D -> B -> C -> A
Answer: A
NEW QUESTION # 98
A company decided to apply its images to applications in Qlik Sense after approval of all of them by Marketing. The area manager asked to create a specific folder for these images, since the default folder would need to a cleaning because it contains many old images.
The system administrator creates a new content library in the Qlik Management Console (QMC) and adds the images so they can be used. Developers report that they are unable to view the new library created, but can view the default library.
What does the system administrator need to do to ensure that developers have access to the new content library?
- A. Users are the ones who need to create their own libraries
- B. Users need to upload their own images to the app
- C. Make sure there is a security rule allowing users to access the new library created
- D. Images should be stored in the default library
Answer: C
NEW QUESTION # 99
A user who can typically create new apps in personal work can no longer create new applications. The user's work stream is no longer displayed. How can this problem be fixed?
Response:
- A. In QMC, in the users tab, make sure it has the ContentAdmin rule
- B. In the QMC, in the Audit tab, check for any rules that are preventing this user
- C. In the QMC, in the License Management tab, check if there is a Professional license asweled for this user
- D. In the QMC, in the License Management tab, check if there is an Analyzer license asweled for this user
Answer: B
NEW QUESTION # 100
Business users report that their Qlik Sense app performs slowly in the afternoon. The system administrator needs to check CPU and RAM utilization during that timeframe.
The system administrator has access only to the QMC and the hub. Which tool should the system administrator use to investigate this issue?
- A. License Monitor
- B. Operations Monitor
- C. Task Manager
- D. Event Viewer
Answer: B
NEW QUESTION # 101
What is the primary function of the Qlik Sense Scheduler Service (QSS)?
- A. To handle visualizations and data models in the apps.
- B. To handle data connections and repository backups.
- C. To manage app reload tasks and user synchronization.
- D. To handle client authentication and load balancing.
Answer: C
NEW QUESTION # 102
What is the primary function of the Qlik Sense Log Monitor app?
- A. To manage and monitor license allocations
- B. To monitor and analyze system logs for troubleshooting
- C. To monitor the performance of reload tasks
- D. To track app usage and user activity
Answer: B
NEW QUESTION # 103
A new Qlik Sense deployment is planned for use by 100 users. The area manager believes that in the next two years, it will grow to 1500, with more than 70 applications. Most current users work from within the company itself. In relation to user growth, a plan is due for sales reps to access externally, outside the network, and the local firewall.
What are the two secure ways to maintain external access to the server?
(Select two)
Deploy Qlik Sense in the corporate network, open all required firewall ports, and allow external users to access apps directly
- A. Deploy Qlik Sense in the DMZ and open all required ports to internal and external users
- B. Configure Qlik Sense in "off-line mode" for external users and allow them to access apps locally
- C. Set up a reverse proxy with DMZ and route traffic to the server
- D. Enable all external users to connect to the corporate network via a secure VPN to access Qlik Sense apps
Answer: A,D
NEW QUESTION # 104
A user needs to upgrade a published app in the Finance stream. After the changes have been made, the app needs to be moved to the Accounting stream. The user has access to a laptop running Windows 7 (32-bit). The owner of all published apps in the sa_repository user.
Which steps should a system administrator take to efficiently complete this task?
- A. 1. Change the app owner to the user to make changes 2. Move the app to the Accounting stream
- B. 1. Export the app to a location for the user to make the changes using Qlik Sense Desktop 2. Import the app back using QMC after the changes have been made 3. Publish the app to the Accounting stream
- C. 1. Change the app owner to the user to make changes 2. Add the Accounting tag to the app 3. Move the app to the Accounting stream
- D. 1. Give the user permissions to make changes to the app 2. Move the app to the Accounting stream
Answer: D
NEW QUESTION # 105
......
New 2026 Realistic Free Qlik QSSA2022 Exam Dump Questions and Answer: https://www.dumpexam.com/QSSA2022-valid-torrent.html
QSSA2022 Practice Test Engine: Try These 169 Exam Questions: https://drive.google.com/open?id=1Rcyz4BQEGGR022J8Xrcf06Z8MDvF6bo-
