[Nov-2021] Updated CCNP Data Center 300-615 Exam Questions BUNDLE PACK
Master The Cisco Content 300-615 EXAM DUMPS WITH GUARANTEED SUCCESS!
How to study the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam
Nothing would be more frustrating than showing up for the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure and finding out that you studied the wrong material. The DumpExam team knows how vital it is to have high-quality test materials that stand up to the real test. All of our study material is checked frequently by trade professionals before being greenlit. We donâÂÂt stop there either. Our material is constantly tested so any updates to the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam or other exams will be reflected in the questions. You can even return and review post-exam day till you know the Cisco material by rote confidently it wonâÂÂt be superannuated.
Standard Exam Characteristics
The exam tries to impart validated cognizance on subject matters like networking, computing, automation, and operations. It contains multiple-choice questions, and the allotted time duration is 90 minutes.
The test can only be taken in the English language presently and is available globally via physical centers and an online proctoring facility. Pearson VUE is the Cisco’s partner and administers 300-615 test, so one has to register on their website to sit for it. Also, a fee of $300 is required and should be paid as an exam voucher.
The score you gain comes with a three-year validity. Then, one needs to fulfill the recertification requirements to continue enjoying the benefits of being accredited.
NEW QUESTION 11
Refer to the exhibit.
A web browser displays a "not secure" warning message when accessing the web interface of Cisco UCS Manager. Which action resolves the issue?
- A. Use a supported web browser.
- B. Use a supported version of UCS Manager.
- C. Use the correct TCP port for HTTPS.
- D. Load third-party certificate to UCS Manager.
Answer: D
NEW QUESTION 12 
Refer to the exhibit. An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?
- A. Disable the check of the MTU value.
- B. Adjust the MTU on Router-A to 1600.
- C. Set the OSPF media type to point-to-point.
- D. Adjust the MTU on Router-B to 1604.
Answer: A
Explanation:
Section: Network
NEW QUESTION 13
Refer to the exhibit.
Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
- A. Configure the upstream ports and the server ports to be in VSAN 100.
- B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.
- C. Update the FCNs database to contain names for VSAN 100.
- D. Activate the correct zoneset for VSAN 100.
Answer: A
NEW QUESTION 14 
Refer to the exhibit. Sw1 and Sw2 are Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. What occurs in this scenario?
- A. Sw2 does not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.
- B. Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them to the underlay network through the uplink interfaces.
- C. Sw1 and Sw2 perform the VXLAN multicast encapsulation and decapsulation for all traffic that is associated with the VXLAN VNIs, depending on the hashing.
- D. Sw1 performs the VXLAN multicast encapsulation and decapsulation for all traffic associated with the VXLAN VNIs.
Answer: D
Explanation:
Section: Network
NEW QUESTION 15
Refer to the exhibit.
A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?
- A. Roll back to the original image.
- B. Reload the switch.
- C. Shut and no shut the interfaces to the FEX.
- D. Enable ISSD after the downgrade is complete.
Answer: A
NEW QUESTION 16
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 17
During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a "No Signal" message from the vKVM and physical connection. Which set of steps resolves the issue?
- A. 1- Power off the server and disconnect the power cord
2- Confirm that all cards are available
3- Connect the power cord and power on the server - B. 1- Disconnect the power cord
2- Confirm that all cards are properly seated
3- Connect the power cord - C. 1- Disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server - D. 1- Power off the server and disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/ts/guide/b_C-Series_Troubleshooting_Guide.pdf
NEW QUESTION 18
Refer to the exhibit.
A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues What is the role of the interface Etht/7?
- A. IOM host interface
- B. server interface
- C. fabric interconnect uplink interface
- D. IOM network interface
Answer: C
NEW QUESTION 19
Refer to the exhibit.
A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?
- A. Configure the admin port type E on the upstream switch that connects the port.
- B. Replace the SFP port module in fc2/10.
- C. Configure the BB_credit buffers on the upstream switch that connects the port.
- D. Enable NPIV on the upstream switch that connects the port.
Answer: D
NEW QUESTION 20
Refer to the exhibit.
Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
- A. Configure the upstream ports and the server ports to be in VSAN 100.
- B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.
- C. Update the FCNs database to contain names for VSAN 100.
- D. Activate the correct zoneset for VSAN 100.
Answer: A
NEW QUESTION 21
A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?
- A. Run the switchport ignore bit-errors command on the interface.
- B. Verify that the SFPs are supported.
- C. Run the shutdown and then no shutdown command on the interface.
- D. Change the SFP to operate at 4 Gbps instead of 2 Gbps.
Answer: A
Explanation:
Section: Storage Network
Explanation
NEW QUESTION 22
An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives the error message "Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?
- A. Disable the telemetry feature
- B. Disable the software-telemetry feature
- C. Disable the inband-telemetry feature
- D. Disable the hardware-telemetry feature
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nexus-9000-series-nx-os-programmability-guide-93x/b-cisco-nexus-9000-series-nx-os-programmability-guide-93x_chapter_0101011.html
NEW QUESTION 23
Refer to the exhibit.
HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?
- A. Configure the same HSRP priority between the two switches.
- B. Configure HSRP version 2 on Nexus7K-2.
- C. Configure preempt on one of the switches in the HSRP group.
- D. Configure the correct subnet mask on Nexus7K-1.
Answer: B
NEW QUESTION 24
Refer to the exhibit.
A web browser displays a "not secure" warning message when accessing the web interface of Cisco UCS Manager. Which action resolves the issue?
- A. Use a supported web browser.
- B. Use a supported version of UCS Manager.
- C. Use the correct TCP port for HTTPS.
- D. Load third-party certificate to UCS Manager.
Answer: D
NEW QUESTION 25
An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN.
The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected.
However, the Linux hosts fail to boot. Which action resolves the issue?
- A. Remove all of the ISO images that are mounted as a virtual CD-ROM.
- B. Delete and reconfigure the boot LUN.
- C. Delete and reconfigure the pWWN of the SAN boot target.
- D. Remove all of the local storage that is installed.
Answer: D
Explanation:
Section: Storage Network
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/ b_UCSM_CLI_Configuration_Guide_2_2/configuring_server_boot.pdf page 5
NEW QUESTION 26
......
The benefit of obtaining the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam Certification
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certification provides practical experience to candidates from all the aspects to be a proficient worker in the organization.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certification has more useful and relevant networks that help them in setting career goals for themselves.Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure networks provide them with the correct career guidance that non certified generally are unable to get.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure certified professionals have the knowledge to use the tools to complete the task efficiently and cost-effectively than the other non-certified professionals lack in doing so.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certifications provide opportunities to get a job easily in which they are interested in instead of wasting years and ending without getting any experience.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certification is distinguished among competitors.Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure certification can give them an edge at that time easily when candidates appear for a job interview companies look to note something which individualizes the individual to another.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure certified professionals will be confident and stand different from others as their skills are more trained than non-certified professionals.
Pass Cisco 300-615 Exam – Experts Are Here To Help You: https://www.dumpexam.com/300-615-valid-torrent.html
Get Latest CCNP Data Center 300-615 Practice Test For Quick Preparation: https://drive.google.com/open?id=1SEXcFEJjY7y7LUIZuIQHlJKQh5q30B_F
