Certification Training for CTAL-TAE Exam Dumps Test Engine [2021]
Nov 14, 2021 Step by Step Guide to Prepare for CTAL-TAE Exam
ISQI CTAL-TAE Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 21
You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?
- A. The ability of the SUTto perform its intended function for a specified period of time
- B. The ability of the SUT to prevent unauthorized access to its components or data.
- C. The abilityto identify states, outputs, intermediate result and error messages in the SUT
- D. The ability to exercise the SUT by entering inputs, triggering events and invoking methods
Answer: C
NEW QUESTION 22
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The SUT code coverage provided by the execution of the regression test suite.
- B. The ratio of comments to executable statements in the SUT code.
- C. The defect density in the automation code of the regression test suite.
- D. The ratio of commands to executable statements in the automation code of the regression test suite
Answer: A
NEW QUESTION 23
Consider the following example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?
- A. A and b are both external TAS metric
- B. A and B are both internal TAS metrics
- C. A is an internal TAS metric and B is an external TAS metric
- D. A is and external TAS metric and b is an internal TAS metric
Answer: B
NEW QUESTION 24
Assume that you are the TAE responsible for the correct functioning of a TAS, deployed in a test environment that consists of a few machines running the same version of the operating system. The TAS has been working and stable since its deployment, it has been used to run an automated test suite consisting of many similar automated test. The infrastructure team is planning to update the operating system on these machines by installing a new the service pack for security reasons. Since the vendor of the operating system assurance full backward compatibility, the infrastructure team assurance that there will be no impacts on the functioning of the TAS.
What is the BEST approach to confirm the correct functioning of the TAS in this scenario?
- A. Do not run any tests because you can immediately confirm the correct functioning of the automated test suite
- B. Verify the behavior of the automated tests by running a small tests, then gradually run the remaining tests to confirm the correct functioning of the whole automated test suite.
- C. Verify the behavior of the whole automated test suite by running all the automated tests
- D. Make sure that the infrastructure team has completed installing the service pack on the machines where SUT is running, then run the whole automated test suite to verify its behavior
Answer: A
NEW QUESTION 25
Consider a TAS associated to dynamically changing software frequent releases. Your goal is to determine the amount of effort required to maintain the automated tests of the regression test suite for each new release of the SUT.
What is the MOST important metric to collect to achieve your goal?
- A. The time it takes to execute all the automated tests, for each new release of the SUT.
- B. The number of automated tests requiring maintenance, for each new release of the SUT.
- C. The code coverage achieved with the automated tests, for each new release of the SUT
- D. The number of automated tests which fail because of a single software defect, for each new release of the SUT
Answer: D
NEW QUESTION 26
Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUT environment. All the preliminary checks to verify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?
- A. Checking whether the post condition have been fulfilled for all the test cases
- B. Checking whether theloading of the TAS is repeatable in the SUT environment
- C. Checking whether all the test cases contain the expected results
- D. Checking whether all the test cases produce repeatable outcomes
Answer: D
NEW QUESTION 27
You identified a suitable project to pilot an automation tool and planned and conduced a pilot. The pilot has been successful and tool Is being deployed within your organization, with a plan to increase tool use by the one project at a time. During this rollout some test processes will be changed slightly to gain additional benefits from using the tool.
In the pilot project, a small set of manual tests were automated for the first time. You are currently monitoring the test automation efficiency and this reveals that the automationregimefor the tests is not yet mature.
Which of the following statements is TRUE?
- A. The approach used for deployed this tool is aligned to the standard success factor for deployment
- B. The test process should be radically changed to gain additional benefits from using the tool.
- C. The pilot project should have been critical so that maximum benefits were delivered
- D. The target defined for the project was inappropriate, because the automationregimeforthe automated tests at the end of the pilot is not yet mature.
Answer: B
NEW QUESTION 28
A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?
- A. Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort
- B. The test automation engineer should work with the business analysts to ensure the new feature is testable
- C. It is generally more difficult to automate test cases for a new feature as the development has not yet started
- D. The introduction of a new feature could require updates or additions to the testware components
Answer: A
NEW QUESTION 29
Consider a TAS that is going to be deployed for the first time. The TAS requires share resources and run it its own test environment. The infrastructure for the TAS has been created along with maintenance procedures. It is very unlikely the TAS will be required to work in other target Environments. There is a high-risk that when the TAS is deployed in its own test environment, a number of existing application will no longer work because of conflicts with the existing shared resources.
Which of the following activities would you expect to be MOST effective at mitigating the risk associated with the first deployment of the TAS?
- A. Testing the TAS for application compatibility issues in the target environment
- B. Testing the TAS for its ability to be implemented in other target test environments.
- C. Testing the TAS for regressions due to optimization that fix non-functional issues.
- D. Testing the TAS for ITS ability to run a shared test environment
Answer: B
NEW QUESTION 30
Which of the following is NOT an advantage of test automation?
- A. The ability to perform tests which would be difficult or impossible to execute manually
- B. The ability to enable a better use of skilled testers by freeing them from repetitive and boring tasks
- C. The ability to run more tests in less time and therefore to make it possible to run them more often
- D. The ability to find more defects with the same tests, compared to executing the same test manually
Answer: D
NEW QUESTION 31
Which of the following statements about the reuse of TAS artefacts is TRUE?
- A. Reusable TAS artefacts can include components (or parts of components) associated with different layers of the TAA
- B. To enable reuse of TAS artefacts, a good design for reuse is built into the TAA and to further action are needed during the TAS lifecycle
- C. Communications maintenance and improvements for reusing TAS artefacts are modify addressed during the design of the TAA
- D. Reusable TAS artifacts associated with the definition layer of the TAA include the adaptors to the SUT components and/or interfaces
Answer: A
NEW QUESTION 32
Consider a TAS that exclusively uses the APIs of a SUT. To make this work, significant changes have been required to the SUT by adding a set of dedicated test interfaces to the APIs. All the automated tests will use these test interfaces when interacting with the SUT. Assume that you are currently verifying the correctness of the automated test environment and test tool setup.
Which of the following would you expect to be the MOST specific risk associated with this scenario?
- A. The connectivityfrom the TAS to the dedicated test interfaces will not work
- B. The automated test cases will not contain the expected result
- C. False alarms, that are unlikely to occur inthe real world, will be observed during testing
- D. The process of configuring the TAS will be error-phone due to manual intervention
Answer: C
NEW QUESTION 33
As a TAE you are evaluating a functional test automation tool that will be for several projects within your organization. The projects require that tool to work effectively and efficiently with SUT's in distributed environments. The test automated tool also needs to interface with other existing test tools (test management tool and defect tracking tool.) The existing test tools subject to planned updates and their interface to the test automated tool may not work property after these updates.
Which of the following are the two LEAST important concerns related to the evaluation of the test automation in this scenario?
* Is the test automation tool able to launch processors and execute test cases on multiple machines in different environments?
* Does the test automation tool support a licensing scheme thatallows accessing different sets?
* Does the test automation tool have a large featureset, but only part of the features will be sets?
* Do the release notes for the planned updates on existing specify the impacts on their interfaces to other tools?
Does the test automation tool need to install specific libraries that could impact the SUT?
- A. A and C
- B. B and E
- C. C and D
- D. A and E
Answer: B
NEW QUESTION 34
A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?
- A. The introduction of a new feature could require updates or additions to the testware components
- B. The test automation engineer should work with the business analysts to ensure the new feature is testable
- C. It is generally more difficult to automate test cases for a new feature as the development has not yet started
- D. Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort
Answer: A
NEW QUESTION 35
You are executing the first test run of a test automation suite of 200 tests. All the relevant information related to the state of the SUT and to the automated test execution is stored in a small database. During the Automated test run you observe that the first 10 test pass, while an abnormal termination occurs when executing the
11thtest. This test does not complete its execution and the overall execution of the suite is aborted. An immediate analysis of the abnormal termination is expected to be time consuming and you have been asked to produce a detailed report of the execution results for the first test run, as soon as possible.
What is the MOST important FIRST step to be taken immediately after the abnormal occurred when executing the 11thtest?
- A. Take a backup of the database in its current state. So It can be analyzed later
- B. Re-run the test automation suite starting from the 12thtest
- C. Re-run the test automation suite starting from the 1sttest.
- D. Return the database to a consistent state that allows subsequent test to run
Answer: A
NEW QUESTION 36
You are currently designing the TAA of a TAS. You have been asked to adopt an approach for automatically generating and executing test cases from a model that defines the SUT. The SUT is a state-based and event-driven that is described by a finite-state machine and exposes its functionality via an API. The behavior of the SUT depends on hardware and communication links that can be unreliable.
Which of the following aspects is MOST important when designing the TAA in this scenario?
- A. Adopting a test definition strategy based on use case/exception case coverage for the definition layer.
- B. Adopting a test definition strategy based on classification tree coverage for the test definition layer.
- C. Looking for tools that allows direct denoting of exceptions and actions depending on the SUT events.
- D. Looking for tools that allow performing setup and teardown of the test suites and the SUT.
Answer: D
NEW QUESTION 37
You have been asked to determine a TAS for a new release of a SUT,test should be automated wherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?
- A. Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.
- B. Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.
- C. Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.
- D. Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.
Answer: C
NEW QUESTION 38
......
Ultimate Guide to Prepare CTAL-TAE Certification Exam for iSQI Advanced Level Test Automation Engineer: https://www.dumpexam.com/CTAL-TAE-valid-torrent.html
iSQI Advanced Level Test Automation Engineer CTAL-TAE Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=1plHk1-qyRYvsooTdUK6UUphaiOyTsbsW
