[Q52-Q73] 300-425 100% Guarantee Download 300-425 Exam PDF Q&A [Nov 01, 2024]

Share

300-425 100% Guarantee Download 300-425 Exam PDF Q&A [Nov 01, 2024]

Get 300-425 Actual Free Exam Q&As to Prepare for Your Cisco Certification


The Cisco 300-425 exam is designed to evaluate the applicants’ knowledge of wireless network design. This is one of the concentration tests that the candidates are required to complete along with the core exam for obtaining the CCNP Enterprise certification. Moreover, those individuals who achieve the passing score will be awarded the Cisco Certified Specialist – Enterprise Wireless Design certificate.


Cisco 300-425 exam is focused on assessing the candidate's ability to design and implement wireless network solutions that meet the requirements of large-scale enterprise organizations. 300-425 exam covers a wide range of topics, including wireless site surveys, wireless network design, wireless security, and wireless network implementation. Candidates who pass 300-425 exam will have the skills and knowledge required to design and implement wireless networks that are secure, reliable, and scalable.


What is Salary of Cisco 300-425 exam

The CCENT certification is a good start in the Cisco certification track. The salary of CCENT level professionals would be 45,000 USD and the salary could reach 99,000 USD with senior professionals.

 

NEW QUESTION # 52
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?

  • A. Deploy environmentally friendly cabling components to blend into the environment.
  • B. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
  • C. Use enclosures to hide the wireless infrastructure in the surrounding environment.
  • D. Paint the access point to cover the LED from being noticeable.

Answer: A


NEW QUESTION # 53
An engineer is designing a high-density WLAN for a 10,000-seat auditorium. The solution must take advantage of human attenuation, as well as the aesthetics of the room. Where must the APs be placed?

  • A. above the seating areas
  • B. on the ceiling
  • C. under the seats
  • D. on the walls

Answer: C


NEW QUESTION # 54
A wireless engineer is using Ekahau Site Survey to validate that an existing wireless network is operating as expected.
Which type of survey should be used to identify the end-to-end network performance?

  • A. passive
  • B. spectrum analysis
  • C. GPS assisted
  • D. active ping

Answer: D

Explanation:
The end-to-end network performance testing (Ping) is always made with the wireless network adapter that is currently associated with the network. Typically it is the laptop's integrated Wi-Fi network adapter, but you may also use external adapter such as an 802.11ac adapter. Before you start the survey, make sure wireless network adapter is connected to the Wi-Fi network to be able to measure the network performance.


NEW QUESTION # 55
An engineer is designing a new wireless network. Based on the design, OceExtend AP functionality must be used. Which type of license must the Cisco 5520 WLC v8.3 have?

  • A. Plus license
  • B. OceExtend AP license
  • C. Base license
  • D. WPlus license

Answer: C

Explanation:
The Cisco 5520 WLC v8.3 requires a base license to use OfficeExtend AP functionality, which allows remote workers to have the same wireless connectivity as they would in an office environment.


NEW QUESTION # 56
Which three parameters are used by Cisco Prime Infrastructure to generate heat maps? (Choose three.)

  • A. the AP SNR
  • B. the RSSI prediction model
  • C. the number of associated clients
  • D. the AP transmit power
  • E. the bandwidth utilization
  • F. the antenna orientation

Answer: B,D,F

Explanation:
An RF heatmap is a graphical representation of RF wireless data where the values taken by variables are represented in maps as colors.
The current heatmap is computed based on the RSSI prediction model, Antenna Orientation, and AP transmit power.
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-
0/user/guide/pi_ug/wireless-map s.html


NEW QUESTION # 57
A user is having issues accessing file shares on a network. The network engineer advises the user to open a web browser, input a prescribed IP address, and follow the instructions. After doing this, the user is able to access company shares. Which type of remote access did the engineer enable?

  • A. Ipsec VPN client access
  • B. VPDN client access
  • C. SSL VPN client access
  • D. EZVPN

Answer: C

Explanation:
The Cisco AnyConnect VPN Client provides secure SSL connections to the security appliance for remote users. Without a previously installed client, remote users enter the IP address in their browser of an interface configured to accept SSL VPN connections. Unless the security appliance is configured to redirect http:// requests to https://, users must enter the URL in the form https://<address>.
After entering the URL, the browser connects to that interface and displays the login screen. If the user satisfies the login and authentication, and the security appliance identifies the user as requiring the client, it downloads the client that matches the operating system of the remote computer. After downloading, the client installs and configures itself, establishes a secure SSL connection and either remains or uninstalls itself (depending on the security appliance configuration) when the connection terminates.
Reference: http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/100936-asa8x-split-tunnel-anyconnect-config.html


NEW QUESTION # 58
An engineer is configuring a centralized set of controllers for separate facilities. Which two Cisco wireless architectures must be used to ensure flexible sizing of WLAN to VLAN mappings?
(Choose two.)

  • A. AP group
  • B. controller group
  • C. RF group
  • D. mobility group
  • E. interface group

Answer: A,D


NEW QUESTION # 59
What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

  • A. 20%
  • B. 50%
  • C. 40%
  • D. 30%

Answer: A

Explanation:


NEW QUESTION # 60
An engineer is designing a new wireless network. The network needs to ful_ll the following requirements:
* support multimedia applications
* support a high concentration of wireless clients
* support data over wireless
* support roaming
Which approach should be used?

  • A. use of micro cells with reduced power levels
  • B. coverage for cells at maximum power levels
  • C. use of macro cells with maximum power levels
  • D. use of macro cells with reduced power levels

Answer: A


NEW QUESTION # 61
Refer to the exhibit.

An enterprise is using wireless as the main network connectivity for clients. To ensure service continuity, a pair of controllers will be installed in a datacenter An engineer is designing SSO on the pair of controllers What needs to be included m the design to avoid having the secondary controller go into maintenance mode?

  • A. The keep alive timer is too low which causes synchronization problems.
  • B. The connection between the redundancy ports is missing.
  • C. The Global Configuration of SSO is set to Disabled on the controller.
  • D. The redundancy port must be the same subnet as the redundancy mgmt.

Answer: A


NEW QUESTION # 62
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:
Explanation

So max 2 will be supported on an AP.


NEW QUESTION # 63
A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?

  • A. AP Heartbeat Timeout
  • B. Application Visibility Control
  • C. RX SOP
  • D. 802.11w

Answer: C


NEW QUESTION # 64
Which two considerations must a network engineer have when planning for voice over wireless roaming?
(Choose two.)

  • A. Roaming time increases when using 802.1x + Cisco Centralized Key Manegement.
  • B. Roaming with only 802.1x authentication requires full reauthentication.
  • C. Full reauthentication introduces gaps in a voice conversation.
  • D. Roaming occurs when the phone has reached -80 dBs or below.
  • E. Roaming occurs when the phone has seen at least four APs.

Answer: B,C


NEW QUESTION # 65
A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?

  • A. network ap-priority is set to disable.
  • B. The high priority access point is oversubscribed.
  • C. The critical priority access point count is oversubscribed.
  • D. network ap-priority is set to enable.

Answer: A

Explanation:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2016/pdf/BRKCOL-2275.pdf


NEW QUESTION # 66
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?

  • A. UDP 16666 for control plane, UDP 16667 for data plane
  • B. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane
  • C. UDP 16667 for control plane, UDP 16666 for data plane
  • D. UDP 16668 for control plane, UDP 16667 for data plane

Answer: A

Explanation:
Section: Mobility


NEW QUESTION # 67
A wireless engineer must assess constraints for a future WLAN deployment for a site that consists of oce cubicles. Which signal propagation attenuation result is associated with this environment?

  • A. refraction
  • B. re ection
  • C. absorption
  • D. noise

Answer: C


NEW QUESTION # 68
Which statement about creating a mobility group is true, excluding mobility anchors?

  • A. Each WLC must use the same mobility domain name and be defined as a peer in each other's static mobility members list.
  • B. The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
  • C. A mobility group does not require all WLCs in the group to use the same virtual IP address.
  • D. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair is considered separately as a mobility peer.

Answer: D

Explanation:
Section: Mobility


NEW QUESTION # 69
A customer has a central Cisco WLC that manages APs in FlexConnect mode. The wireless infrastructure supports multiple small branches. One branch deploys new CCX wireless phones that are authenticated by a central Cisco ISE via PEAP/IMSCHAPv2, and trac is switched locally. The customer must reduce the number of full authentication requests and optimize roaming for the new phones. Which action accomplishes the requirement?

  • A. Enable Aironet IE on the voice SSID and add APs to a FlexConnect group.
  • B. Enable Aironet IE on the voice SSID and add APs to an AP group.
  • C. Enable CCKM on the voice SSID and add APs to an AP group.
  • D. Enable CCKM on the voice SSID and add APs to a FlexConnect group.

Answer: D

Explanation:
To reduce full authentication requests and optimize roaming, enabling Cisco Centralized Key Management (CCKM) on the voice SSID is effective. CCKM allows for fast re-authentication during roaming, which is beneficial for voice applications. Adding APs to a FlexConnect group helps manage APs in remote branches more efficiently.


NEW QUESTION # 70
An engineer is designing a wireless network to support high availability. The network will need to support the total number of APs and client SSO. Live services should continue to work without interruption during the failover Which two requirements need to be incorporated into the design to meet these needs? (Choose two.)

  • A. redundant WLC
  • B. back-to-back direct connection between WLCs
  • C. controller high availability pair with one of the WLCs having a valid AP count license
  • D. 10 sec RTT
  • E. WLC 7.5 code or more recent

Answer: B,C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId


NEW QUESTION # 71
Drag and drop the characteristics from the left onto the correct functionalities on the right.

Answer:

Explanation:

Explanation:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONS


NEW QUESTION # 72
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer selects?

  • A. 802.11ac
  • B. 802.11r
  • C. 802.11i
  • D. 802.11e

Answer: B

Explanation:


NEW QUESTION # 73
......

300-425 Questions Truly Valid For Your Cisco Exam: https://www.dumpexam.com/300-425-valid-torrent.html

Cisco Actual Free Exam Questions And Answers: https://drive.google.com/open?id=1rBj0gicp3oAYazLkBv190iJROFrKfTBm