Updated PD1-001 Dumps Questions Are Available [2022] For Passing CompTIA Exam
Free UPDATED CompTIA PD1-001 Certification Exam Dumps is Online
NEW QUESTION 285
A customer is interested in using TWAIN scanning with an MFD. Which of the following does the customer need?
- A. Appropriate driver
- B. DNS server address
- C. ADF
- D. UNC path to device
Answer: A
NEW QUESTION 286
A customer has a deadline to print a large job and their printer requires parts which will not arrive in time. They are very frustrated with the technician and the printer. Which of the following is the BEST response?
- A. Explain that there are other customers who also need attention and the schedule cannot be changed.
- B. Explain there is nothing else that can be done and the customer wil have to deal with it.
- C. Empathize with the customers situation and suggest rerouting this job in order to meet the deadline.
- D. Explain the part wil be arriving the next day and the unit will be serviced at that time.
Answer: C
NEW QUESTION 287
Which of the following does the DHCP protocol do?
- A. Automatically generates and assigns an IP address to a networked device.
- B. Allows printers to communicate with print drivers.
- C. Allows network servers to access and backup local hard drives.
- D. Controls communication from the desktops and laptops to their local peripherals.
Answer: A
NEW QUESTION 288
The CCD unit has an affect on all of the following EXCEPT:
- A. scan time.
- B. compression.
- C. resolution.
- D. color depth.
Answer: B
NEW QUESTION 289
Which of the following would be the BEST process for the technician to follow when beginning to diagnose a unit at a customers site?
- A. Go directly to the printer and investigate any issues that are found.
- B. Gather information from the primary user, and then evaluate the printers condition.
- C. Check the printers error log, and then inform the primary user what the issue is.
- D. Investigate the printers status, then ask the primary user to write down what they think is wrong.
Answer: B
NEW QUESTION 290
A customer is using a remanufactured toner which has caused damage to the fuser unit and wil require the unit to be cleaned. The unit is covered under warranty, but using remanufactured toner causes the warranty to be voided. This is now a chargeable service. Which of the following is the BEST response from the technician?
- A. Do not use remanufactured toner; it states that in the warranty. You will be billed for this service call and the parts.
- B. Using remanufactured toner is not covered by manufacturers warranty. Therefore this service call and the parts required will be chargeable.
- C. You have voided the warranty so any services will now be charged to your company.
- D. You will be receiving a bill after the service is complete. Here is my contact information.
Answer: B
NEW QUESTION 291
Which of the following is the primary reason that all toner contamination should be removed from a device?
- A. To maintain good print quality
- B. The device could emit excessive ozone
- C. To increase the print speed
- D. To increase processing speed
Answer: A
NEW QUESTION 292
Which of the following components is used to detect the position of the paper throughout the machine?
- A. Clutches
- B. Sensors
- C. Motors
- D. Solenoids
Answer: B
NEW QUESTION 293
Which of the following is the MOST likely cause of light images when scanning?
- A. No output from the CCD
- B. Cracked lens
- C. Dirty mirrors
- D. Wrong scanner driver
Answer: C
NEW QUESTION 294
The print head moves left to right, drops down a line, then right to left. Which of the following represents this method of printing?
- A. Dithering
- B. Unidirectional
- C. Bi-directional
- D. Duplexing
Answer: C
NEW QUESTION 295
In an ink dispersion printer, which of the fol owing BEST describes the function of the absorption pads?
- A. Used only for shipping
- B. Lowers acoustic levels
- C. Collects waste ink
- D. Col ects internal moisture
Answer: C
NEW QUESTION 296
Which of the following describes the function of lamps located inside the fuser?
- A. Generates heat
- B. Removes excess toner
- C. Charges the pressure roller
- D. Removes residual charges
Answer: A
NEW QUESTION 297
A customer states that every time they try to print a particular document, it prints part of the page and then locks up the spooler. Which of the following is the MOST likely reason for this issue?
- A. The document is too large for the memory
- B. A defective network interface card
- C. A defective data cable
- D. A defective laser unit
Answer: A
NEW QUESTION 298
Which of the following is the MOST likely symptom if the white reference plate on a scanning device is dirty in one area?
- A. Registration error
- B. Skewed Image
- C. Streak
- D. Paper Jam
Answer: C
NEW QUESTION 299
Which of the following is used to remove the airborne byproduct caused by the charging of the photoconductor?
- A. Fan
- B. Noise filter
- C. Toner filter
- D. Ozone filter
Answer: D
NEW QUESTION 300
A customer calls to report that the scan images are taking up too much space on their server. The customer tells the technician they are scanning at 600dpi, in PDF format, and using a TWAIN driver in the ADF mode. Which of the following is the MOST likely cause of the excessive space usage?
- A. The TWAIN driver needs updated
- B. Scan from the glass instead of the ADF
- C. Scan resolution size
- D. Scan file format
Answer: C
NEW QUESTION 301
Electromagnetic clutches require periodic:
- A. rotation.
- B. adjustment.
- C. replacement.
- D. lubrication.
Answer: C
NEW QUESTION 302
Which of the following messages should only be addressed by a technician?
- A. Paper Jam message
- B. Add Paper message
- C. Service error message
- D. Add Toner message
Answer: C
NEW QUESTION 303
......
CompTIA Exam 2022 PD1-001 Dumps Updated Questions: https://www.dumpexam.com/PD1-001-valid-torrent.html
Get The Most Updated PD1-001 Dumps To PDI+ Certification: https://drive.google.com/open?id=17CsnRGjykMjWh9c7-6P7Eg8xDZlqRWwx
