[Dec 06, 2021] Latest HPE0-J68 PDF Dumps & Real Tests Free Updated Today
HPE0-J68 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
NEW QUESTION 23
A customer has a 3PAR storeserv with FC and SSD drives who would like to improve the performance for random reads. Which 3PAR Storeserve feature would provide better read performance?
- A. Smart Cache
- B. Adaptive Flash Cache
- C. Deduplication
- D. Express Layout
Answer: B
NEW QUESTION 24
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?
- A. Zero Detect
- B. Persistent Cache
- C. Express Writes
- D. Express Indexing
Answer: C
NEW QUESTION 25
You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.
They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.
Which storage connectivity components should you recommend?
- A. Ethernet switches, Nimble FC card, dedicated FC for servers
- B. FC switches, Nimble FC card, FC adapters for servers
- C. FlexFabric switches, Nimble iSCSI card. FC adapters for servers
- D. Ethernet switches, Nimble iSCSI card, dedicated NICs for servers
Answer: D
NEW QUESTION 26
Which tool is used to provide centralized management of 3PAR and Primera arrays?
- A. SSMC
- B. SMU
- C. Primera UI
- D. WebUI
Answer: A
NEW QUESTION 27
Which of the following are part of the SimpliVity Data Virtualization Platform architecture? (Choose two.)
- A. Security Layer
- B. Presentation Layer
- C. Data Management Layer
- D. User Management Layer
Answer: B,C
NEW QUESTION 28
A customer has an excisting environment with 3PAR,Nimble and MSA.
They are providing file
servicing from all arrays with multiple virtual machine but preference is not adequate.
What should you add to the environment to increase performance ,increase availability, and reduce management overhead?
- A. StoreEasy 3850 Gateway
- B. StoreEasy 5000
- C. Simplvity 380
- D. 3PAR File Persona
Answer: A
NEW QUESTION 29
You are advising a customer on a new backup strategy to deploy HPE StoreOnce.
What should you recommend to ensure the best storage utilization and performance?
- A. combine management and backup Ethernet traffic
- B. consolidate activity windows for housekeeping tasks
- C. use separate backup targets for different data types
- D. size solution for a single backup device
Answer: B
NEW QUESTION 30
A customer has a large amount of the data on their Primera that is mission critical. The business needs RPO to be under 5 minutes.
Which protection technology should you recommend?
- A. backup to tape
- B. archiving
- C. asynchronous replication
- D. synchronous replication
Answer: D
NEW QUESTION 31
Which SAN topology offers the highest centralized data access performance?
- A. Ring
- B. Meshed
- C. Cascaded
- D. Core-Edge
Answer: D
NEW QUESTION 32
Which tool is used to configure an HPE MSA 2052?
- A. CMC
- B. SSMC
- C. InfoSight
- D. SMU
Answer: C
NEW QUESTION 33
Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?
- A. NinjaCrawler
- B. StoreVista
- C. NinjaProtected
- D. NinjaStars
Answer: C
Explanation:
By performing a free NinjaProtected backup assessment, HPE and its partners can demonstrate how customers can reduce the amount of backup data they need to store by 95%-guaranteed (HPE StoreOnce Get Protected Guarantee Program
NEW QUESTION 34
A customer has a large deployment of HPE Synergy compute modules. HPE 3PAR StoreServ arrays, and HPE StoreOnce system in a single data center. They are concerned about the risk of data loss due to site disaster and seeks cost-effective offsite Disaster Recovery protection without the need to deploy a secondary site.
Which HPE solution should you recommend?
- A. HPE StoreOnce Catalyst
- B. HPE StoreOnce RMC
- C. HPE StoreOnce VSA
- D. HPE StoreOnce CloudBank
Answer: A
NEW QUESTION 35
A customer's environment consists of two HPE Synergy frames running VMware vSphere, HPE FlexFabric 5700 switches, and one HPE Nimble HF-series array connected via 10GbE-T ports to the FlexFabric switches. The customer is concerned about performance management of the whole solution stack.
When using infosight with VMvision and analyzing end-to-end latency, which of the components within the stack are displayed? (Choose Three)
- A. host
- B. application
- C. ISCSI network(SAN)
- D. Ethernet network (LAN)
- E. operating system
- F. storage
Answer: A,B,C
NEW QUESTION 36
Which HPE 3PAR StoreServ feature allows a host to continue I/O uninterrupted during a firmware upgrade?
- A. Persistent Ports
- B. Persistent Memory
- C. Persistent Cache
- D. Peer Persistence
Answer: A
NEW QUESTION 37
Which statement is true when defining object storage ?
- A. It is most suited for sharing files and characterized by volumes
- B. It is most suited for unstructured data and characterized by file share protocols like NFS
- C. suited for database It is most and characterized by containers or buckets
- D. It is most suited for unstructured data and characterized by containers or buckets
Answer: D
NEW QUESTION 38
A small company has recently purchased an MSA and two B-series SN3000B switches. In an effort save money, they installed the solution themselves. They call you complaining they can now see the multiple volumes on the MSA after creating just a single volume.
What should you advise them to do?
- A. Set volume's tier affinity to Performance
- B. Enable Smart SAN on the MSA 2052
- C. Enable zoning on the SN3000B switches
- D. Enable MPIO on their host
Answer: D
NEW QUESTION 39
What owns the physical drives in an HPE 3PAR StoreServ Express Layout?
- A. a logical disk
- B. a single node
- C. a chunklet
- D. a node pair
Answer: D
NEW QUESTION 40
A customer wants to implement a new storage network, but wants to retain the ability to connect with legacy fiber channel-based components.
Drag the appropriate component to each box on the diagram to design a new storage network.
Answer:
Explanation:
NEW QUESTION 41
A customer want to implement a virtualized environment and want to provide independent storage access to individual virtual servers. Which feature need to enabled on the B-series FC switches to support this solution?
- A. ALPA
- B. NPIV
- C. RSCN
- D. FCIP
Answer: B
NEW QUESTION 42
......
2021 Valid HPE0-J68 test answers & HP Exam PDF: https://www.dumpexam.com/HPE0-J68-valid-torrent.html
Pass HP HPE0-J68 Exam With Practice Test Questions Dumps Bundle: https://drive.google.com/open?id=1CsmYaFwktqXeaP1h6swAD8N542L3Ui0l
