Latest [Feb 07, 2022] ACMA-6.3 Exam with Accurate Aruba Certified Mobility Associate 6.3 PDF Questions [Q35-Q53]

Share

Latest [Feb 07, 2022] ACMA-6.3 Exam with Accurate Aruba Certified Mobility Associate 6.3 PDF Questions

Take a Leap Forward in Your Career by Earning Aruba 88 Questions

NEW QUESTION 35
Visual RF Plan requires certain building information when defining a new building.
Which one of the following is NOT a user supplied building specification?

  • A. Building name
  • B. Number of APs
  • C. Longitude and Latitude
  • D. Desired data rate
  • E. Attenuation between floors

Answer: B

 

NEW QUESTION 36
Which of the following information is gathered by APs during scanning periods? (Select
three)

  • A. Type of non-802.11 interference detected
  • B. Security threats in the surroundings
  • C. MAC addresses of neighboring APs
  • D. Interfering Clients connected to other APs
  • E. 4.9 GHz devices

Answer: B,C,D

 

NEW QUESTION 37
Identify the benefits of using aliases when writing firewall policies (Select three)

  • A. Simplifies repetitive configuration.
  • B. End users are applied to the proper role.
  • C. Makes policies more readable.
  • D. Can be applied to a Role
  • E. Changes to policy rules that use aliases are auto updated.

Answer: A,C,E

 

NEW QUESTION 38
Which of the following is true of an Aruba Mobility Controller acting as a layer 3 router? (Select two):

  • A. The Mobility Controller is the client's default router.
  • B. The Mobility Controller acts as a bridge.
  • C. OSPF must be configured
  • D. The Mobility Controller supports BGP.
  • E. DHCP can be provided by the network infrastructure or the Mobility Controller.

Answer: A,E

 

NEW QUESTION 39
The characteristics of 802.1X Authentication include (Select three):

  • A. Port based authentication
  • B. Support of RADIUS external authentication
  • C. L3 Authentication
  • D. EAP terminates on authenticator
  • E. Extensible Authentication Protocol

Answer: A,B,E

 

NEW QUESTION 40
A port firewall policy is applied to a trunk port that denies controller access. An "allow all" Vlan firewall policy is applied to VLAN 33 on the same port. A user connected to VLAN 33 on that port attempts to gain access to the controller. Which of the following statements is true?

  • A. The Vlan policy is applied, then the port policy, therefore no controller access
  • B. The Port policy is applied, therefore no controller access
  • C. The Vlan policy is applied, therefore access to the controller is allowed
  • D. When locally connected to a controller's port you always have controller access
  • E. You cannot place a firewall policy on a Ports Vlan when the Port already has a policy, therefore no controller access

Answer: C

 

NEW QUESTION 41
What are some best practices when configuring the Aruba Firewall (Select two)?:

  • A. Create a different policy for each unique rule
  • B. Create different policies for access to different servers
  • C. Use aliases when possible
  • D. Write rules from least specific to most specific
  • E. Take actions like blacklisting when users violate policies

Answer: C,E

 

NEW QUESTION 42
In the startup wizard the ports configuration screen allows you to do the following (Select three)?

  • A. Specify the IP address of the Vlan
  • B. Configure port channels
  • C. Identify trunk ports
  • D. Identify the native VLAN for a port
  • E. Assign VLANs

Answer: C,D,E

 

NEW QUESTION 43
Which firewall action is necessary in a guest pre-authentication role to display the captive portal login screen?

  • A. allow CP
  • B. allow all
  • C. route
  • D. DST-NAT
  • E. SRC-NAT

Answer: D

 

NEW QUESTION 44
Which of the following parameters is not needed by Visual RF Plan in order to Plan APs on a floor region?

  • A. PHY Type
  • B. AP Type
  • C. Desired Data Rate
  • D. Distance to Controller
  • E. Environment

Answer: D

 

NEW QUESTION 45
Which of the following core components of ARM enables intelligent distribution of clients across available channel capacity?

  • A. Band steering
  • B. Spectrum load balancing
  • C. Multi-band scan
  • D. Rogue AP detection
  • E. Coordinated Access to a Single Channel

Answer: B

 

NEW QUESTION 46
In Extensible Authentication Protocol (EAP) terminology the client station is called the:

  • A. Station
  • B. End node
  • C. Authenticated Client
  • D. Supplicant
  • E. Client Device

Answer: D

 

NEW QUESTION 47
View the Server group and User Roles screen shots above.

A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of "employee".
What Role will the user get?

  • A. The User will get the Emp Role
  • B. The User will get the Employee Role
  • C. The User will get the 802.1x authentication default Role
  • D. The User will get the employee Role
  • E. The User will get the initial Role

Answer: C

 

NEW QUESTION 48
View the Server group screen shot above.

A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x authentication at both locations. The user's credentials are only found in the Miami Radius server "RadiusMiami". There is no Radius synchronization and both servers are reachable. What happens when the user attempts to authenticate?

  • A. RadiusNY1 receives the request and returns a deny. The authentication request will then be sent to RadiusMiami.
  • B. The controller recognizes the users Domain and sends the authentication request directly to RadiusMiami.
  • C. RadiusNY1 receives the request and returns a deny. No other action is taken.
  • D. The request is initially sent to RadiusNY1 then RadiusNY1 redirects the controller to send the authentication request to RadiusMiami
  • E. The RadiusNY1 sends the request to RadiusMiami that replies to the controller

Answer: C

 

NEW QUESTION 49
Which match condition can be used by a server derivation rule? (Choose two)

  • A. greater than
  • B. inverse of
  • C. less than
  • D. contains
  • E. equals

Answer: D,E

 

NEW QUESTION 50
Which of the following is true about configuring a server group?

  • A. If multiple servers are assigned to the server group, all except the 1st will be ignored
  • B. If the internal database is used in the server group, then no external servers can be added
  • C. A server group can have more than 1 server
  • D. All the servers in a server group will be used round robin style
  • E. Server rules are used to send information to the configured servers

Answer: C

 

NEW QUESTION 51
How many roles should be created on a controller?

  • A. The same number as firewall policies
  • B. The same number as SSIDs
  • C. One less than the number of firewall policies
  • D. One per authentication type
  • E. As many as necessary

Answer: E

 

NEW QUESTION 52
Which of the following is NOT available for configuration via startup wizard?

  • A. Firewall Roles
  • B. VLAN IP
  • C. Loopback IP
  • D. Controller name
  • E. Country Code

Answer: C

 

NEW QUESTION 53
......

Authentic Best resources for ACMA-6.3 Online Practice Exam: https://www.dumpexam.com/ACMA-6.3-valid-torrent.html

Practice To ACMA-6.3 - DumpExam Remarkable Practice On your Aruba Certified Mobility Associate 6.3 Exam: https://drive.google.com/open?id=1syFfyGzAZ54ftKmi9OLzqB_F0IEV66Rf